Saturday, 30 May 2015

Basic Soap and Detergent Chemistry

To understand what is needed to achieve effective cleaning, it is helpful to have a basic knowledge of soap and detergent chemistry.


[A detergent is a surfactant or a mixture of surfactants having "cleaning properties in dilute solutions”. Commonly, "detergent" refers to alkylbenzenesulfonates, a family of compounds that are similar to soap but are less affected by hard water.] [1]

a) Hydrophilic ~ inorganic, water loving [: compounds that have an affinity to water and are usually charged or have polar side groups to their structure that will attract water]

b) Lipophilic (Hydrophobic) ~ organic, water hating [: compounds that are repelled by water and are usually neutral (zero charge.)]

Surfactants have a polar group at one end (hydrophilic) and a non-polar group at the other end (lipophilic). The interaction of these two groups in water will reduce the surface tension of water. One end is inorganic and mixes with water, the other end is organic, and will dissolve other organic compounds; a detergent solution will dissolve both organic and inorganic soils

These terms have much to do with the structure of water itself. Water consists of two hydrogen atoms joined to one oxygen atom (H2O) all in a triangular pattern. The oxygen is negatively charged whilst the hydrogen end is positively charged. Thus, water molecules are actually attracted to each other and form hydrogen bonds.

Water is inorganic and anything that will mix with water is hydrophilic. Oil and anything that will mix with oil are hydrophobic, which is organic, so when water and oil are mixed they separate (See also Emulsion)

a) Soap refers to a liquid cleanser with a slightly acidic pH

b) Detergents usually contain surfactants (laundry or specialist cleaners) although most car wash concentrates contain detergents

Alkali
An alkali is a soluble salt of an alkali metal like sodium or potassium. Originally, the alkalis used in soap making were obtained from the ashes of plants, but they are now made commercially. Today, the term alkali describes a substance that chemically is a base (the opposite of an acid) and that reacts with and neutralizes an acid. The common alkalis used in soap making are sodium hydroxide (NaOH), also called caustic soda; and potassium hydroxide (KOH), and also called caustic potash

Amines
Monoethanolamide (MEA), Diethanolamides (DEA) and Triethanolamine (TEA) are used in cosmetics as "buffers" and "emulsifiers". That is to say, they help control a solution's pH balance (buffer) and they also help water-based and oil-based ingredients work together (emulsification, they also serve as anti-foaming agents.

Chelators
Are used in chemical analysis, as water softeners, and are ingredients in many commercial products. Citric acid is used to soften water in soaps and laundry detergents. Chelators are commonly used in industrial manufacturing as detergent additives, stabilizing agents, preservatives, and flavour and colour retainers. Ethylenediaminetetra acetic acid (EDTA) is one of the most popular. It is an agent that is capable of forming either four or six bonds with metal ions. EDTA is widely used for enhancing the cleaning power of detergents and soaps by forming chelates with the magnesium and calcium metals in hard water.

Enzymes
[: are responsible for thousands of metabolic processes that sustain life. They are highly selective catalysts, greatly accelerating both the rate and specificity of metabolic chemical reactions]
Enzymes are proteins that catalyse (i.e., increase the rates of) chemical reactions. In enzymatic reactions, the molecules at the beginning of the process, called substrates, are converted into different molecules, called products. Almost all chemical reactions in a biological cell need enzymes in order to occur at rates sufficient for life. Since enzymes are selective for their substrates and speed up only a few reactions from among many possibilities, the set of enzymes made in a cell determines which metabolic pathways occur in that cell.

Like all catalysts, enzymes work by lowering the activation energy for a reaction, thus dramatically increasing the rate of the reaction. As a result, products are formed faster and reactions reach their equilibrium state more rapidly. Most enzyme reaction rates are millions of times faster than those of comparable un-catalysed reactions. As with all catalysts, enzymes are not consumed by the reactions they catalyse, nor do they alter the equilibrium of these reactions.

Enzyme cleaners use chemicals naturally manufactured by plants and animals that cause chemical reactions that break down specific types of chemicals. An enzyme is a type of protein that can break up complex molecules into smaller pieces. Contrary to popular belief, enzymes are not living things. Enzyme activity can be affected by other molecules: decreased by inhibitors or increased by activators. Many drugs and poisons are enzyme inhibitors. Activity is also affected by temperature (increases in temperatures speed up reactions and help the enzyme function and develop the end product even faster) pressure and chemical environment (i.e. pH values)

Odour-causing bacteria are "food" for these micro-organisms that is consumed by the bio-enzymatic cleaners are converted into two basic compounds: carbon dioxide and water. Because enzymes only work on specific types of chemicals; proteins, lipids, sugars, enzyme cleaners must be matched to their purpose.

Enzyme cleaners work quickly by bio-degrading the stain, they will eliminate grease, oil, dirt, grime, vomit, urine, blood, coffee or food into its basic carbon, hydrogen or oxygen element, thereby eliminating the problem. Enzyme cleaners are non-toxic and effective, they clean better than toxic and non-toxic detergents. Enzymes cleaners remove odours completely by breaking down the micro-particulates causing the odour. They are used mainly for carpet and upholstery cleaning. They will often remove tough stains and odours that other types of cleaners can’t. You can use different enzymes for different types of stains.

Catalyst
A catalyst works by lowering the activation energy for a reaction, thus dramatically increasing the rate of the reaction. As a result, products are formed faster and reactions reach their equilibrium state more rapidly. Most reaction rates are millions of times faster than those of comparable un-catalysed reactions. A catalysts is not consumed by the reactions they catalyse, nor do they alter the equilibrium of these reactions.

Controlling pH
Popular chemicals include sodium hydroxide a caustic metallic base. It is used in many industries, mostly as a strong chemical base in the manufacture of soaps and detergents; it is often used to increase the alkalinity of a mixture, or to neutralize acids

Chelators
Are used in chemical analysis, as water softeners, and are ingredients in many commercial products. Citric acid is used to soften water in soaps and laundry detergents. Chelators are commonly used in industrial manufacturing as detergent additives, stabilizing agents, preservatives, and flavour and colour retainers. Ethylenediaminetetra acetic acid (EDTA) is one of the most popular. It is an agent that is capable of forming either four or six bonds with metal ions. EDTA is widely used for enhancing the cleaning power of detergents and soaps by forming chelates with the magnesium and calcium metals in hard water.

Cloud Point 
[:The cloud point of a non-ionic surfactant solution, is the temperature at which  the mixture starts to phase separate and two phases appear, thus becoming cloudy] [1]

The temperature at which a surfactant becomes insoluble in water; this becomes important when designing detergents for use in hot water

Emollients
Dishwashing detergents (Dawn, Cascade, Rinse Ad, etc.) contain emollients; an ingredient designed to protect a person's hands, by keeping them soft and prevent cracking and drying. However emollients make the paint surface more difficult to dry and leave an oily residue, this thin film, which also aids ‘sheeting’ from glassware.

The problem is that these emollients do not rinse away and you are left with a thin film on the vehicles paint surface, which will negatively impact product cross-linking and its durability. They also contain Diethanolamides, which act as foaming agents or as emulsifiers

Emollients have three basic properties:
 1.      Occlusion - providing a layer of oil on the surface of the skin to slow water loss and thus increase the moisture content,
2.      Humectants - increasing the moisture-holding capacity of the stratum
3.      Lubrication - adding slip to glide across the skin

Fats and Oils 

The fats and oils used in soap making come from animal or plant sources. Each fat or oil is made up of a distinctive mixture of several different triglycerides. In a triglyceride molecule, three fatty acid molecules are attached to one molecule of glycerin. There are many types of triglycerides; each type consists of its own particular combination of fatty acids. Fatty acids are the components of fats and oils that are used in making soap.

They are weak acids composed of two parts: A carboxylic acid group consisting of one hydrogen (H) atom, two oxygen (O) atoms, and one carbon (C) atom, plus a hydrocarbon chain attached to the carboxylic acid group. Generally, it is made up of a long straight chain of carbon (C) atoms each carrying two hydrogen (H) atoms.

Optical Brightener
[: are dyes that absorb light in the ultraviolet and violet region (usually 340-370 nm) of the electromagnetic spectrum, and re-emit light in the blue region (typically 420-470 nm)]

Brighteners (Z)-Stilbene) is one of several different chemicals used and were  once commonly added to laundry detergents to replace whitening agents removed during washing and to make the clothes appear cleaner. Optical brighteners have replaced bluing which was formerly used to produce the same effect. Some brighteners can cause allergic reactions when in contact with skin, depending on the individual.

These synthetic chemicals that make fabrics appear to glow in the presence of ultraviolet light; something that is really clean should not be an optical illusion; they don't have anything to do with getting things clean -- they're only added to detergents to make us think our laundry is brighter and whiter than it really is. 

These agents absorb ultraviolet light and emit it back as visible blue light.
Optical brighteners are actually ultraviolet dyes that may be invisible under many lighting conditions; for an optical brightener to work properly it must be exposed to ultraviolet light usually from sunlight; thus, they’re not of much value if the light falling on the treated surface is mainly incandescent (light bulbs).

There are additional potential problems with the use of optical brighteners; one of these is its tendency to yellow with age, which is one of the reasons that carpet and furniture manufacturers discourage its use. This chemical is not biodegradable and can pass through waste-water treatment plants and endanger aquatic plants and fish

Oxygen booster


Oxygen bleaches are materials that release oxygen for cleaning and ‘bleaching’ of stains and dirt upon addition to hot water; once they are dissolved in water, they release an oxygen activator, Sodium Percarbonate that contains about 10-15% oxygen. The chlorine-free formula is colour-safe and biodegradable

Phosphates
Sodium tripolyphosphate (STPP) is an ingredient use to enhance the performance capabilities of automatic dishwasher detergents. They contribute buffering strength, sequestering (or chelating) power, dispersion and absorptive capabilities, and solubility. They not only strip food and grease from dishes but also prevent food debris becoming reattached during the wash. Phosphates are usually used as compounds of phosphate ions in combination with one or more common elements, such as sodium, calcium, potassium, and aluminium

Seventeen states banned phosphates from dishwasher detergents because the chemical compounds also pollute lakes, bays and streams as they create algae blooms and starve fish of oxygen.

Surfactants 
Surfactants perform other important functions in cleaning, such as loosening, emulsifying (dispersing in water) and holding soil in suspension until it can be rinsed away. Surfactants can also provide alkalinity, which is useful in removing acidic soils. Surfactants are classified by their ionic (electrical charge) properties in water: anionic (negative charge), non-ionic (no charge), cationic (positive charge) and amphoteric (either positive or negative charge).

The temperature at which a surfactant becomes insoluble in water; 85 O.F (30°C) or below. This becomes important when designing detergents for use in hot water

Many surfactants will adhere to a paint surface to enhance gloss or stop water spotting or because they see the paint protection product as rather similar in structure to the oils they like to bond with. Many products that contain surfactant will leave a film on the paint surface, which attracts water so masking any beading or sheeting.

Be cognizant that not all surfactants do the same thing, nor do they do it to the same degree. A surfactant is to all intents a ‘wetting agent’, different surfactants have different ability to wet surfaces. Beading and sheeting (hydrophobic and hydrophilic) are really just differences in hydrophobicity. A simplistic explanation of a surfactant is a clingy oil.

Soap is an anionic surfactant. Other anionic as well as non-ionic surfactants are the main ingredients in today's detergents. The chemistry of surfactants- soaps are water-soluble sodium or potassium salts of fatty acids. Soaps are made from fats and oils, or their fatty acids

Sulphates
Sodium lauryl sulphate, sodium laureth sulphate, ammonium lauryl sulphate, ammonium laureth sulphate, TEA lauryl sulphate, and TEA laureth sulphate are collectively called sulphates; sulphates are surfactants, which create foam and suds

Water 
The liquid solvent most commonly used for cleaning, has a property called surface tension. In the body of the water, each molecule is surrounded and attracted by other water molecules. However, at the surface, other water molecules only on the waterside surround those molecules. A tension is created as the water molecules at the surface are pulled into the body of the water. This tension causes water to bead up on surfaces (glass, fabric), which slows wetting of the surface and inhibits the cleaning process.

You can see surface tension at work by placing a drop of water onto a counter top. The drop will hold its shape and will not spread. In the cleaning process, surface tension must be reduced so water can spread and wet surfaces. Chemicals that are able to do this effectively are called surface-active agents, or surfactants. They are said to make water "wetter."

Water Temperature 
Warm or hot water melts fats and oils so that it is easier for the soap or detergent to dissolve the soil and pull it away into the rinse water. The temperature at which a surfactant becomes insoluble in water 85 O.F (30°C) or below.

Thermal energy (hot water) gets things cleaner along with mechanical energy (abrasion) and chemicals (surfactants, enzymes and etc.); if you reduce the thermal energy you need to increase the other two to compensate. However there are some newer surfactants and enzymes that work well in cold water. 

I think this illustrates the importance of detailers understanding the ‘science’ of cleaning; and to this end it is helpful to have a basic knowledge of soap and detergent chemistry and what is needed to achieve effective cleaning

All Purpose Cleaner (APC)

An all-purpose cleaner (APC) (pH 9.5 – 12.5 dependent upon mfg.) is an aggressive, grease-cutting cleaner for engine compartments and wheels. It’s better to use a specific stain remover than to compromise. Always select a chemical / cleaner that are biodegradable, environmentally friendly and safe to use by observing any precautions recommended so that they won’t harm you, your vehicle or the environment

Many well-intentioned detailers use the so-called all-purpose cleaning (APC) chemical for detailing. Using a product like Simple Green or a degreaser to clean everything from wheels to carpets is both dangerous and harmful to the materials used for modern automobile materials. A safer alternate is a  d-limonene (citrus-based) solvent, they are biodegradable, environmentally friendly and safe to use. There is no such thing as a one size fits all type chemical cleaner, regardless of what a car care product vendor would have you believe.

Most detailing chemicals are formulated to remove specific stains and a little knowledge of their pH and chemical content will help in their correct selection and use; the most common types of chemicals include surfactants, solvents, wetting agents, Saponifiers and Chelators

How Soaps are made

Soaps are mixtures of sodium or potassium salts of fatty acids, which can be derived from oils or fats by reacting them with an alkali (such as sodium or potassium hydroxide) in a process known as saponification.

Saponification of fats and oils is the most widely used soap making process. This method involves heating fats and oils and react them with a liquid alkali to produce soap and water (neat soap) plus glycerine.

The other major soap making process is the neutralization of fatty acids with an alkali. Fats and oils are hydrolysed (split) with a high-pressure steam to yield crude fatty acids and glycerine. The fatty acids are then purified by distillation and neutralized with an alkali to produce soap and water (neat soap).

When the alkali is sodium hydroxide, sodium soap is formed. Sodium soaps are "hard" soaps. When the alkali is potassium hydroxide, potassium soap is formed. Potassium soaps are softer and are found in some liquid hand soaps and shaving creams. The carboxylate end of the soap molecule is attracted to water. It is called the hydrophilic (water-loving) end. The hydrocarbon chain is attracted to oil and grease and repelled by water. It is known as the hydrophobic (water-hating) end.

How Water Hardness Affects Cleaning Action

Although soap is a good cleaning agent, its effectiveness is reduced when used in hard water. Hardness in water is caused by the presence of mineral salts - mostly those of calcium (Ca) and magnesium (Mg), but sometimes also irons (Fe) and manganese (Mn). The mineral salts react with soap to form an insoluble precipitate known as soap film or scum. Soap film does not rinse away easily. It tends to remain behind and produces visible deposits on clothing and makes fabrics feel stiff. It also attaches to the insides of bathtubs, sinks and washing machines.

Reacting with hard water minerals to form the film uses up some soap. This reduces the amount of soap available for cleaning. Even when clothes are washed in soft water, some hardness minerals are introduced by the soil on clothes. Soap molecules are not very versatile and cannot be adapted to today's variety of fibres, washing temperatures and water conditions.

Surfactants in detergents

Definition [: compounds that lower the surface tension of a liquid, the interfacial tension between two liquids, or that between a liquid and a solid. Surfactants may act as detergents, wetting agents, emulsifiers, foaming agents, and dispersants]

Surfactants actually reduce the surface tension of water by a factor of three or more. A detergent is an effective cleaning product because it contains one or more surfactants. Because of their chemical makeup, the surfactants used in detergents can be engineered to perform well under a variety of conditions. Sodium stearate, the most common component of most soap, which comprises about 50% of commercial surfactants; such surfactants are less sensitive than soap to the hardness minerals in water and most will not form a film. 

Detergent surfactants were developed in response to a shortage of animal and vegetable fats and oils during World War I and World War II. In addition, a substance that was resistant to hard water was needed to make cleaning more effective. At that time, petroleum was found to be a plentiful source for the manufacture of these surfactants.

Surfactants are common to both washing-up liquids and car care products; namely Sodium laureth sulphate, or sodium lauryl ether sulphate (SLES) a foaming agent, Dodecylbenzene sulphonic acid (neutralised with Sodium Hydroxide, Triethanolamine or Isopropanolamine).

Detergent surfactants are made from a variety of petrochemicals (derived from petroleum) and/or oleo chemicals (derived from fats and oils). Petrochemicals and Oleo chemicals like the fatty acids used in soap making, both petroleum and fats and oils contain hydrocarbon chains that are repelled by water but attracted to oil and grease in soils.

These hydrocarbon chain sources are used to make the water-hating end of the surfactant molecule. Other Chemicals, such as sulphur trioxide, sulphuric acid and ethylene oxide, are used to produce the water-loving end of the surfactant molecule.

Foaming agents, emulsifiers, and dispersants are all surfactants which suspend respectively, a gas (air) an immiscible liquid, or a solid in water or some other liquid. Although there is similarity in these functions, in practice the surfactants required to perform these functions differ widely. In emulsification, as an example - the selection of surfactant or surfactant system will depend on the materials to be used and the properties desired in the end product. An emulsion can be oil droplets suspended in water, oil in water emulsion, water suspended in a continuous oil phase, or a mixed emulsion. The surfactants form what amounts to a protective coating around the suspended material, and these hydrophilic ends associate with the neighbouring water molecules.

Solubilisation - is a function closely related to emulsification. As the size of the emulsified droplet becomes smaller, a condition is reached where this droplet and the surfactant micelle are the same size. At this stage, an oil droplet can be imagined as being in solution in the hydrophobic tails of the surfactant and the term solubilisation is used. Emulsions are milky in appearance and solubilised oils, for example - are clear to the eye.

Detergency- the function of detergency or cleaning is a complex combination of all the previous functions. The surface to be cleaned and the soil to be removed must initially be wet and the soils suspended, solubilised, dissolved or separated in some way so that the soil will not just re-deposit on the surface in question

All surfactants have the following features: they make the removal of dirt easier by reducing the surface tension between the water and the paint surface, they produce foam, and this foam suspends dirt and stops it from being re-deposited.

There are surfactants that use Marangoni stress to prevent droplet formation, Since a liquid with a high surface tension pulls more strongly on the surrounding liquid than one with a low surface tension, the presence of a gradient in surface tension will naturally cause the liquid to flow away from regions of low surface tension so that water drains from the surfaces in thin sheets, rather than forming droplets, its drawback is that it leaves a thin film on the dried surface.

The benefits of using it are that it prevents "spotting" caused by droplets of water drying and leaving behind dissolved lime scale minerals, and can also improve drying performance as there is less water remaining to be dried its drawback is that it leaves a thin film on the dried surface.

Ionic and non-ionic surfactant - zwitterionic (amphoteric) surfactants have both cationic and anionic centres attached to the same molecule. The cationic part is based on primary, secondary, or tertiary amines or quaternary ammonium cations. The anionic part can be more variable and include sulfonates, as in CHAPS (3-[(3-Cholamidopropyl) dimethylammonio]-1-propanesulfonate). Other anionic groups are sultaines illustrated by cocamidopropyl hydroxysultaine. Betaines, e.g., cocamidopropyl Betaines Phosphates: lecithin

Zwitterionic (amphoteric) surfactants have both cationic and anionic centres attached to the same molecule.

How Detergent Surfactants Are Made Anionic Surfactants
The chemical reacts with hydrocarbons derived from petroleum or fats and oils to produce new acids similar to fatty acids. A second reaction adds an alkali to the new acids to produce one type of anionic surfactant molecule. First converting the hydrocarbon to an alcohol and then react with the fatty alcohol with ethylene oxide produce non-ionic surfactants non-ionic surfactant molecules. These non-ionic surfactants can be reacted further with sulphur containing acids to form another type of anionic surfactant.

How Soaps and Detergents work

Soap is usually a blend of several surfactants, which are two opposing polar groups, hydrophilic and a non-polar group lipophilic. The interaction of these two groups in water will reduce the surface tension of water from 72 to 35 dynes/cm soap creates foam by trapping air inside, which is about 95% air and 5% soap / water, this foam has no effect on its cleaning ability. The/surfactants use emulsification to dissolve and encapsulate oily particles and that reduces the amount of active surfactants left in the bucket. So if the surface is very oily, you will see a substantial drop in the suds and therefore a reduction in its cleaning ability.

These types of energy interact and should be in proper balance. Let's look at how they work together. Let's assume we have oily, greasy soil on clothing. Water alone will not remove this soil. Nearly all compounds fall into one of two categories: hydrophilic ('water-loving') and hydrophobic ('water-hating'). Water and anything that will mix with water are hydrophilic. Oil and anything that will mix with oil are hydrophobic. When water and oil are mixed they separate.

Hydrophilic and hydrophobic compounds just don't mix. These opposing forces loosen the soil and suspend it in the water. Warm or hot water helps dissolve grease and oil in soil.

Washing machine agitation or hand rubbing helps pull the soil free. The cleansing action of soap is determined by its polar and non-polar structures in conjunction with an application of solubility principles.

 One important reason is that oil and grease present in soil repel the water molecules. Now let's add soap or detergent. The surfactant's water-hating end (lipophilic) is repelled by water but attracted to the oil in the soil.
At the same time, the water-loving end (hydrophilic) is attracted to the water molecules.

Back when laundry was done with soap flakes, suds level was an indicator of cleaning performance. So, many people today think that a good rich level of suds is necessary for clean laundry. However, this is no longer true. Today's detergents are formulated to have any suds level desired without affecting cleaning performance. "They make the removal of dirt easier by adding surfactants that reduce the surface tension between the water and the paint surface.

In reality suds (a chemical foaming agent - Diethanolamides or Sodium laureth sulphate or sodium lauryl ether sulphate) do absolutely nothing to clean, they are simply a structure that a portion of the solution had taken due to being mixed with air; they still contain the same ratio of soap. They are however, a good indicator of the amount of active soap in the solution.
The amount of foaming produced has nothing to do with its cleaning efficiency (although it does provide a means of encapsulation as well as acting a cushion between the paint surfaces and cleaning tool)  They are there simply because we are so engrained with the idea that soap suds do the cleaning that it is impossible to use anything else.
In almost all detergents the suds are made by a foaming agent, not by the cleaning agents in the detergent. In fact, industrial cleaners usually have no foaming agents and specialized users do not want suds. Think of a hand degreaser, or rinse less car washes (ONR) there are no suds yet it sure does the job

Car Wash Concentrates

A good quality car wash should provide a slightly alkaline pH and a balanced blend of active biodegradable ingredients, to provide lubrication to prevent scratching, to lift and encapsulate dirt, road grime and oils.
Washing-up Liquids (Detergent)

The use of this type of detergent has been debated for years among car detailing enthusiasts.
Problems arise when people use dish washing liquid as their normal car wash soap. From a chemical standpoint using dishwashing detergents to clean a porous, sensitive clear coat paint surface is very poor choice. 
 Notable brands of dishwashing liquid include Procter & Gamble’s Dawn®, which is the leading brand in the United States, and Fairy Liquid, which is the bestselling brand in the United Kingdom and similar type dish washing liquids chemistry relies primarily on detergent and surfactant technology. This type of chemistry has advanced to the point that it can be engineered to specific soils (i.e. organic grease)
Detergent and soap chemistry and product formulation is a lot more complicated than this, suffice it to say; modern car wash formulations are automotive soil specific. As a means of paint surface preparation and the removal of wax / polymer sealants it’s not very effective as paint protection products are usually formulated to be detergent resistant
 [Your car surface and the dirt that gets on it are a lot different from the food soils and dishes that dishwashing liquids clean effectively. We don't recommend them for cleaning your car] Proctor and Gamble
See also FAQ Proctor and Gamble website - http://www.dawn-dish.com/en_US/questionsaboutdawn.do
Water quality
Such as pH values, mineral content, harness, etc. surfactants used and other characteristics will affect how well a car wash concentrate works. As well as conditioners to maintain the shine without stripping the paint of essential oils (the way detergents do) and dispersing them in the rinsing process, warm water (not hot) will improve the cleaning abilities of wash concentrates.
The amount of foaming produced has nothing to do with its cleaning efficiency (although it does provide a means of encapsulation as well as acting a cushion between the paint surfaces and cleaning tool) when laundry was done with soap flakes; suds level was an indicator of cleaning performance. Many people still equate a good rich level of suds with cleaning; however, this is no longer true. Today's quality car wash concentrates are formulated with anionic surfactants that have a very low suds level without affecting cleaning performance. One of the advantages of this formulation is that road dirt and grime are encapsulated in its structure (micelles), which makes for very easy and efficient rinsing.
The harsh detergents found in some car wash soaps contain sodium silicate or sodium hydroxide may etch the surface of the clear-coat leaving white residue or dulling the entire finish. Car wash concentrates that contain a high foaming (suds) agent can be corrosive, if sodium (salt) is used as an agent to create the foaming. The usual dilution is l oz. per two gallons water (using a lesser dilution will leave a film on the paint surface) Avoid products that contain harsh detergents as they will emulsify and leach out any oils or waxes that provide protection and/or flexibility

I would like to think that these articles become an asset to anyone who is new to detailing and to professional’s alike, as well as industry experts who seek to advance their knowledge.
I hope the above article was informative. By having some understanding of the ‘What’ and ‘Why’ as well as the ‘How’ along with a little science to help you understand how the chemicals we use react, you can achieve the results you desire.
I would appreciate it if you would share this article as it helps other detailers further their knowledge.
Questions and/ or constructive comments are always appreciated.
Copyright © 2002 - 2012 TOGWT® (Established 1980) all rights reserved




Leather Steering Wheel Renovation


Replacement or having someone do a rewrap at an upholstery shop would be an expensive option.
Be cognizant that unless you have a temporary replacement wheel you won’t be able to use your vehicle for at least three days while your applying pigmentation and refinishing the wheel, so plan accordingly

The leather covering on a steering wheel is a very high wear area and is given an OEM clear top coat urethane protective covering. Often the colour can wear through fairly quickly as they are exposed to ultra violet (UV-B) radiation and heat which causes them to lose moisture and dry out becoming brittle and subject to cracking. 

As the skin of your hands are in contact with bare leather, perspiration and body oils are both acidic , which along with any dirt and grime will become absorbed. Besides staining your leather, it will also make it shiny and can also can weaken and break down the stitching as well as the leather, degrading the finished leather leading to ultimate failure.

A few days before commencing the actual leather renovation, clean the finished leather surfaces and then use Leather Master™ Leather Degreaser to remove any body oils and then apply Leather Master™ Soft, this is not a conditioner per se but it will soften the finished leather and make it easier to work with.

Remove the Steering Wheel

Disconnect the negative battery terminal, and remove the steering wheel. Once the wheel has been removed, remove all of the electronics and trim plates.

Light Surface Scratches

Finished (urethane) leather surface scratches (usually from jewellery (rings) or fingernails - for light slightly scuffed surfaces  use 2500 grit finishing paper, with light pressure sand the area until the marks have faded.

For deeper scratches - Then use a very thin application of Leather Master’s Leather Filler, water- based acrylic paste that fills out scratches in leather or any part of that grain that is missing.

All the steps for preparation and pigmentation application are the same, although it’s a good idea to use a mild degreaser to remove any oil or grease from the surface and then proceed by removing the manufactured finish from the leather with leather solvent; (Leather Masters™ Leather Degreaser) this allows the pigmentation colorants to adhere and penetrate the leather, giving a sound base covering, uniformity and to will ensure an original equipment manufacturers (OEM) finish.

Use painter’s tape and/or masking paper around anything that doesn’t require pigmentation applied (i.e. interior of the wheel and the rear vinyl etc.

Urethane Surface Cracks

As the leather hide loses moisture and becomes dehydrated, it begins to shrink and stiffen. This leaves a miniscule gap between the leather hide and the pigmented (colour) urethane coating on top of it. The urethane coating is no longer supported by the hide; without proper support, it starts to crack.

Pigmentation (Colour) Renovation

Certain areas of your vehicles leather interior like seats, upholstery, side mouldings and steering wheels inevitably start to show signs of wear, even if well taken care of, that spoil its overall impression. Often these imperfections are not serious and are simply colour that has worn off or light scratches in the leather surface which can be removed and will disappear with the right application technique and leather pigmentation. Swisswax Leather Refurbishing Pigmentation

Steering wheels typically have a matte clear coat to protect them from ultra violet (UV-B) light, so it’s important to replace this finish as it protects and enhances the leather and preserves its durability. Leather World Technologies Top Coat is a water-based clear coating for finished (pigmented) leather. This product provides a clear finish designed to give abrasion protection and better durability for finished leather. 

Allow the pigmentation to cure for 24 hours before the application of the clear coat. Apply with a clean lint free 100% cotton micro fibre towel, being careful to apply a two thin uniform coats (allow each coat to thoroughly dry) to reduce build-up and streaks, allow to dry for 24 -36 hours; dependent upon temperature and humidity. This type of clear paint can be 'heat cured' with infra-red heat, a heat gun or a hair dryer

Finally apply a surface a protection product Leather Masters Protection Cream with a dry micro fibre towel and allow to thoroughly dry and then lightly buff. This provides a Scotchgard™ type protection specifically formulated for leather

Note: the same methodology and products can be used on leather shift stick (gear knob) covers

Leather Stitching

If the stitching and finished leather surfaces are different colours try to avoid allowing any pigmentation to dry on the stitching; to remove wipe with a water-based solvent cleaner. Leather stitching is usually cotton and nylon mix, nylon is attacked by harsh petroleum distillate solvents, they melt it and weaken the threads, which may cause the stitching to fail over time
Stitching is somewhat friable if subjected to excessive abrasion, bearing this in mind the cleaner needs to ‘do the work’ without relying on friction.

To renovate / clean stitching using a medium / hard horse hair brush, a toothbrush or a sponge
Its greatest enemies are; sun, heat, oil (including body oils) perspiration (that contains urea as well as organic salts and acids) and Try to avoid getting leather chemicals on the stitching or in the seams as it can discolour some threads. If the chemical gets in between panels, it may be difficult to get it out. This may even weaken the backing at the seams.

Leather stitching is usually cotton and nylon mix, nylon is attacked by solvents, they melt it and weaken the threads. An oil-based product will attract abrasive dirt / grit and permeated the leather via the stitching, the oil will soften the leather, and the abrasive dirt plus friction may cause the leather to tear and / or the stitching to fail. Do not use harsh solvent-based cleaners as this may cause the stitching to fail over time

Stitching is somewhat friable if subjected to excessive abrasion. Bearing this in mind the cleaner and applicator (a semi-soft toothbrush is ideal) needs to ‘do the work’ without relying on excess friction

a)      Clean stitching using a medium / hard horse hair brush, a toothbrush or a sponge, spray and work the aqueous (water- based) cleaner (Leather Masters™ Cleaner ) don't spray on directly on to the surfaces , spray on the brush, constantly rinse the brush in clean water, remove cleaner by rinsing with clean water.

b)      Use an aqueous (water- based) foaming cleaner;  Leather Masters™ Foam Cleaner, shake aerosol thoroughly and then lightly rub surface and immediately wipe with a terry towel to remove excess moisture. You may need to repeat this process.
Once the stitching and the seating surfaces are clean apply Leather Masters™ Leather Protection this will help to keep the stitching clean and inhibit the ingress of dirt and soil

Do not use solvent or solvent –based cleaners as the surface colour mwy run and stain/dye the stitching (see Leather Degreaser)

Leather Master™ Leather Degreaser

Is an aerosol product for cleaning oily stains; it dissolves and removes oil and grease from finished leather surfaces. This cleaner can be applied for cleaning all types of leather (check for colour fastness) this aerosol product is ideal for cleaning this type of stain as it dissolves the oils and transforms them into a powder that is more absorbent than the leather. 

This powder is what is wiped off, cleaning and degreasing the leather. Allow the white powder to dry fully. If the powder is drying to a yellow colour, it means that there are still a lot of oils in the leather.

 I would like to think that these articles become an asset to anyone who is new to detailing and to professional’s alike, as well as industry experts who seek to advance their knowledge.

I hope the above article was informative. By having some understanding of the ‘What’ and ‘Why’ as well as the ‘How’ along with a little science to help you understand how the chemicals we use react, you can achieve the results you desire.

I would appreciate it if you would share this article as it helps other detailers further their knowledge.
Questions and/ or constructive comments are always appreciated.


Copyright © 2002 - 2012 TOGWT® (Established 1980) all rights reserved

Friday, 29 May 2015

Business Partnership


Here are some things to consider before you take on any partnership deal:

Obviously, only go into business with those you trust. Vet everyone in your business dealings, whether it be a contractor, a tenant, etc. This could mean conducting background checks and calling personal references. This is especially true with your business partner(s) and is by far the most important way to protect yourself when entering a partnership.

Address potential issues before they become issues. Talk about worst-case scenarios. If your partner isn't willing to do so, for whatever reason, you have the wrong partner.

Read and understand your partnership documents before you sign them. A good attorney can help you identify possible issues and present solutions, but ultimately you and your business partner(s) need to take ownership of the agreement and share a thorough understanding of how it will govern your business.

Consider getting separate counsel if using the same attorney as your partner(s) is presenting concerns.
If you live in a community property state, have every business partner’s spouse sign the partnership/operating agreement and any amendments. The spouse presumably has an ownership interest in the business, and you want them to agree to the provisions of the partnership/operating agreement. This is especially important regarding the method of valuing the business when buying out a partner in the event of a divorce.

Setting up the Partnership

Creating the partnership agreement and setting up the proper entity/structure for the partnership are the two most important steps in the partnership process. Understanding the mechanics of how your business will be managed is the key to designing your partnership agreement and documenting the terms. While the list of items to consider in a solid partnership agreement is indefinable—every partnership is different—I've narrowed it down to my top ten:

1. Partner roles in signing and authorizations. Have a very clear understanding of what the managers or officers of the business are authorized to do on behalf of the company.

2. Duties and responsibilities of each partner. There should be a description of each partner’s responsibilities and duties so each partner knows what to expect from the other. Furthermore, there should be predetermined consequences for partners not completing their duties.

3. Contributions of capital. What amount of time, money, and assets is each partner contributing to the partnership? This includes the initial contributions as well as additional contributions that may be necessary to continue operating the business in the future.

4. Rights to distributions, profits, compensation, and losses. Any right of the partners to receive discretionary or mandatory distributions, which includes a return of any or all of their contributions, needs to be clearly and specifically set forth in the partnership agreement.

5. Unanimous vote requirements. Which events or decisions will require a unanimous vote of the business partners? It’s crucial that you and your business partners decide the procedure together from the outset.

6. Dissolution or exit strategy. The partnership agreement should indicate the events upon which the partnership is to be dissolved and its affairs wound up. It’s possible the business concept and model don’t lend themselves to answering this question. But, for example, in a real estate deal, it’s important to have a timeline and possible triggering events that will lead to either selling the property or buying out one of the partners if they don’t want to stick around for the long haul.

7. A buy-sell provision or separate buy-sell agreement. This type of agreement addresses major changes in the partnership arrangement. For example, what if one partner voluntarily or involuntarily leaves the partnership? How are they bought out? What happens if you want to sell your ownership interest—should your business partner have a right to buy it before you sell it to a third party? What if your business partner dies? Or gets divorced? Or files for bankruptcy? Or just wants to retire?

8. Expulsion provision. Carefully consider this provision, which is a double-edged sword. The benefit of such a provision is that you can put in writing when a partner can be forced out of the business. For example, you and your partners could agree that if one partner isn’t pulling their weight, they can be forced out. But be certain your well-deserved, three-week vacation to Tahiti doesn’t trigger the expulsion clause.

9. Non-compete provision. For example, you and your business partner(s) may agree that if one of the partners leaves the business, they cannot open a competing business or work for a competing business within a certain number of miles and for a certain period of time.

10. Miscellaneous provisions. Some examples include a provision for attorney’s fees for the non-breaching party if they win a lawsuit, a mediation or binding arbitration clause so you don’t have to go to court if you don’t want to, or a venue or choice of law provision on which state law would be applied in a contract dispute and where the dispute would be litigated.

Make sure you sit down with your partner(s) to discuss the best- and worst-case scenarios. Have a competent and honest attorney represent the company or have each partner hire an attorney to review the partnership documents and address the above issues, as well as the individual and specific needs of your and your partners’ particular situation.

The Best Entity for a Partnership

In most cases, the best structure for a partnership is the limited liability company (LLC). I realize there are unique situations where a corporation or a limited partnership might make sense; however, those are the exception and not the rule. In fact, if you need to save taxes, it’s typical to have each member’s share of the LLC owned by an S corporation.

There are three significant reasons why the LLC is such a perfect entity for partnerships. Here's a brief summary:

1. Its limited liability protection shields you from the acts of your partner (and vice versa). Without it, you have unlimited vicarious liability.

2. The operating agreement and corresponding initial minutes and formation documents are fantastic documents to define all of the partnership terms.

3. The flexibility of the LLC is beneficial for allocating profits, losses, and capital, as well as for allowing individual partners to do their own tax planning after they receive their allocated share of profit.

Partnership Management

After all the documentation's been completed and you begin operating as a partnership, you should follow several procedures for a successful venture.

Here are the top three habits that will help a partnership succeed:

1.      Communication and documentation. As the business partnership evolves, record and document anything that's contrary to your initial partnership/operating agreement. A good partnership/operating agreement will allow for revisions due to changing circumstances, but these should always be in writing and signed by each business partner.

2.      Be involved in your business. Don’t ever think a partnership is a turnkey operation. People who aren’t in constant communication with their partners will soon find themselves on the outside and in a dispute. Clearly understand your duties and responsibilities, and fulfil the expectations of your partners or readdress what those expectations should be.

3.      Bookkeeping and tax deposits. Don’t cut corners on bookkeeping and finances. This is the lifeblood of your business and will determine when and how your profits are distributed. Making sure your tax deposits are made on time and in the right amounts is also the backbone of good tax planning in your partnership. Beware of “phantom income,” which is income from the partnership that exists on paper but has no corresponding distributions. This can wreak havoc on a partner’s individual tax return without proper bookkeeping and planning.

I would like to think that these articles become an asset to anyone who is new to detailing and to professional’s alike, as well as industry experts who seek to advance their knowledge.

I hope the above article was informative. By having some understanding of the ‘What’ and ‘Why’ as well as the ‘How’ along with a little science to help you understand how the chemicals we use react, you can achieve the results you desire.

I would appreciate it if you would share this article as it helps other detailers further their knowledge.
Questions and/ or constructive comments are always appreciated.


Copyright © 2002 - 2012 TOGWT® (Established 1980) all rights reserved